Gate Valves

Kennedy Valve revolutionized the gate valve market in the early 1980’s by offering the first resilient seated gate valve in the USA.

Fire Hydrants

Fire hydrants have been used in fire protection for over 100 years.


Gasketed SDR 35 Sewer Fittings & pipe are design using reinforced branches and intersections to enhance the structural integrity to provide long-lasting performance.

Ductile Iron Pipe

Simplicity, sturdiness and water-tightness are built into the system by design.


Brass Saddles Single & double Straps.

Corp Stops

All Ford Stops are individually inspected and tested for leaks with air pressure. They are all compatible with tapping machines of current design.

Repair Clamps

All stainless design is lightweight and easy to handle under adverse conditions associated with almost every main break

Tapping Sleeves

Ford FAST Tapping Sleeves take the guesswork out of large pipe taps.

Pipe couplings

Ford Cast Couplings offer an easy and economical way of joining pipe, whether the pipe is of the same nominal size and type or different at each coupling end


Uni-Flange has the most technically advanced, high performance mechanical joint restraint for PVC pipe available in the water works industry with the Series 1500.

MJ Fittings

complete line of Ductile Iron Mechanical Joint (MJ) Fittings, and a complete line of coatings and linings including Fusion Bonded Epoxy and Protecto 401™ Ceramic Epoxy.

Flange Fittings

Ductile Iron Flange Fittings in accordance with ANSI/AWWA C110/A21.10

Tapping Sleeves

The complete tapping sleeve is made from Carbon Steel

Repair Clamps

All stainless sewer clamp

Pipe couplings

All Pipe couplings

Service Saddles

All Iron Saddle With Straps

Casing Spacers / Chocks

Stainless Steel or Polyethylene

Sewer Fittings

Heavy Wall Sewer Gasketed Fittings

Storm Pipe

Corrugated HDPE pipe is ideal for drainage projects


N-12® Flex eliminates the need for open trenching

Test Plugs

Single-Size Underground Test-Ball

Blocking Plugs

Test ball plugs are pneumatic plugs designed for blocking flow


High performance solvent specially formulated to work with unique challenges


Soft-set virgin PTFE paste for all threaded metal and plastic piping

Jobsite esentials

Safety, gloves, clean-up, ropes, hoses


Cutting, long handle, measuring, irrigation


Reduced Pressure Principle Detector Backflow Assembly


Is composed of 5052-H32 marine grade aluminum

Submersible Pumps

LB Series

Rugged dewatering pumps built to fit into 8" pipes in 2/3HP, 1HP, and 2HP.

LSC Series

Low level residue pump capable of pumping water continuously at 1/16 inches

LSR Series

Low level high volume residue pump capable of pumping down to 1/4 inches

HS Series

Submersible pump designed for water, wastewater and light slurry pumping. Residential, commercial, industrial & construction dewatering applications.

UT Series

Prevents clogging by solids and fibrous materials through the use of a vortex impeller and wide passage

EPT Series

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Trash pump with 2", 3" and 4" designs with Honda GX engine.

TE Series

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Centrifugal pump with 1", 2", 3" and 4" designs with Honda engine.

THP Series

High pressure engine powered pump for sprinkling, irrigation, and fire protection.

TPG Series

Quiet, dependable contractor grade units available in recoil or electric start.

C Series

Tsurumi C Series Cutter Pump™ is solids handling non-clog submersible pump with a unique tungsten carbide tipped single or multi-vane impeller & high chrome serrated wear plate for shredding of solids.

B Series

Solids handling, non-clog submersible pump designed for raw sewage and wastewater.

BK Series

Solids handling non-clog submersible pump featuring a standard cooling jacket at lo water levels without overheating.

BZ Series

Solids handing non-clog submersible pump with unique channel impeller designed for raw sewage in wastewater

MG Series

Foreign matter is finely ground by the built-in grinder mechanism

U Series

Semi-vortex, cast iron impeller passes solids and stringy materials without clogging

PU Series

Multi-purpose pump with a semi-vortex impeller to handle solids. Medium head / high volume pump.

UZ Series

Vortex impeller and wide interior pump casing to handle suspended solids

End Suction

B Series

Proven Multi-Stage Design Abrasion and dry-run resistant

Jet Pumps

Automatic Pressure Regulator With a Faster Acting and Quieter Design